Step 2 Set Logical Drive as Bootable Volume
This section describes how to set the new logical drive as a bootable volume.
|
➢
|
To set new logical drive as bootable volume: |
|
1.
|
In the left-hand pane, select HPE Smart Array E208i-a SR Gen10, and then click Set Bootable Logical Drive/Volume. |
|
2.
|
Select the ''Local - Logical Drive 1'' as Primary Boot Logical Drive/Volume, and then click Save. |
A summary window is displayed.
|
4.
|
Exit the Smart Storage Administrator utility by clicking the X sign on the top right-hand side of the screen, and then confirm. |
|
5.
|
Click Exit at the bottom left-hand corner of the screen. |
|
6.
|
Click the Power icon in the upper right-hand corner of the screen. |
|
7.
|
Click Reboot to reboot the server. |
The Disk Array configuration is now complete.